Quick Start
Walk through the complete flow — place components, wire them, number the wires, run the check, export — with one minimal control circuit.
1. Create a new sheet
Choose File ▸ New (⌘N) to create a drawing. A new document opens as a landscape A4 sheet (297×210 mm) with a 5 mm grid and snapping enabled, title-block version 1.0, and the page named “图纸 1” (Sheet 1).
2. Fill in the title block
With no object selected, the right-hand 属性面板 (inspector) shows the 图纸设置 (Sheet Settings). Under the 标题栏 (Title Block) section, fill in 图纸名称 (Drawing Name), 图号 (Drawing Number), 版本 (Version), and 设计 (Designer); this content is drawn in the title block at the bottom-right corner of the sheet. The 图幅 (Sheet Size) section lets you switch to A0–A4, B0–B5, or a custom size; the 网格 (Grid) section controls grid display and snapping. See Sheet Setup.
Tip
The Drawing Name goes into the title block; the “图纸 1 / 图纸 2 …” entries in the 图纸 (Sheets) tab on the left are page names, generated automatically by the app — there is currently no place to rename them. Drawing name and page name are not the same thing.
3. Place components
Search in the 符号库 (Symbol Library) tab on the left (matching by name, pinyin initials, or symbol code — type “jcq” or “接触器”, for example), click a symbol in the list, then click the canvas, and the symbol lands at the click point. Keep clicking to place several in a row; press Esc to stop placing.
Place a 接触器线圈 (contactor coil) first, then a 接触器常开触点 (contactor NO contact). Afterwards switch back to the 选择 (Select) tool and click the component — its device information only appears in the inspector once the component is selected; a freshly placed symbol is not selected automatically.
4. Complete the device data and link coil to contact
Select the coil and confirm, in the 设备信息 (Device Data) section of the inspector, the
代号 (Tag, e.g. KM1), 名称 (Name), 型号 (Model),
and 规格 (Rating). Then select the contact and use the 关联到已有设备
(Link to Existing Device) menu to pick KM1. After linking:
- the coil and the contact share one device and occupy a single row in the BOM;
- the labels beside the components automatically write out each other's location, in the format “触点 图号-分区” (_contact DrawingNo-Zone_), for example “触点 GZ-01-B3” — this is a cross-reference (Pro).
See Device Data.
5. Draw wires
Click 导线 (Wire) in the toolbar (or press W), press the mouse on the top pin of the coil, drag to a pin of another component, and release; EletraDraw generates an orthogonal path automatically. Endpoints snap to pins, existing wires, or junctions as you get close. If you drop a wire endpoint onto the middle of another wire, that wire is split and a 接点 (Junction) is created. When two wires merely cross and you do not want them connected, just keep the Wire tool; use the Junction tool (J) only when a connection is intended. See Wiring.
6. Wire numbers
Choose 图纸 ▸ 全部重新编号 (Sheet ▸ Renumber All, ⇧⌘R) to give every wire a number under the current rules, or select some wires first and run 仅选中导线重新编号 (Renumber Selected Wires Only). A single wire's number can be rewritten directly in the 线号 (Wire Number) section of the inspector. 线号规则… (Numbering Rules…) and 锁定线号 (Lock Wire Number) are Pro features. See Wire Numbers and Numbering Rules.
7. Electrical check
Choose 图纸 ▸ 电气检查 (Sheet ▸ Electrical Check) (Pro). The app lists floating pins, junctions with too few connections, duplicate device tags, unpaired interruption points, and marks the offending objects with a red exclamation point on the canvas. See Electrical Check.
8. Reports and export
图纸 ▸ BOM 与端子表… (Sheet ▸ BOM and Terminals…) opens the project reports; File ▸ 导入导出 (Import/Export) can export PDF (all sheet pages), PNG, or SVG (the current sheet page). Free-version exports carry a watermark. See BOM (Bill of Materials), Terminal Schedule, and Export.
Concepts worth understanding
| Concept | Meaning |
|---|---|
| Sheet page (图纸页) | One concrete drawing surface. A project can have multiple pages; the free version allows at most 2. |
| Component / device (元件 / 设备) | A symbol instance on the canvas is a component; several symbols of the same real device (coil, contacts) share one 设备 (device) record and one tag. |
| Pin (引脚) | An electrical connection point on a symbol, typed as power input/output, signal input/output, passive, or ground. |
| Junction (接点) | An electrical connectivity marker between wires. Placed between two wires, it merges them into the same network. |
| Potential network (电位网络) | The equipotential set derived from wires, junctions, and pins; wire numbering and interruption-point pairing are both based on it. |
| Interruption point (中断点) | Paired 中断点(源)/中断点(目标) (Interruption Point (Source)/(Target)) symbols that carry the same potential across pages under the same network name. |
| Wire number (线号) | The number annotated on the longest segment of a wire; it can be renumbered automatically, rewritten by hand, or locked. |
| Cross-reference (交叉引用) | Mutual labels between a coil and its contacts, giving the page and zone of the other one. |
| Layer (图层) | A set of visible/locked flags within a sheet page. Layers affect only display and editing, not electrical computation. |
Tip
On your first sheet, set the sheet size and fill in the title block before placing components: component positions are not rearranged automatically when the sheet size changes, so resizing late means tidying the layout by hand.