Bill of Materials
How to open it: 图纸 ▸ BOM 与端子表… (Drawing ▸ BOM and Terminal Table…, ⇧⌘B), or File ▸ 导入导出 ▸ 报表 ▸ BOM / 端子表… (Import and Export ▸ Reports ▸ BOM / Terminal Table…). The window is titled 项目报表 (Project Report), with the hint “报表随图纸与设备属性实时刷新” (the report refreshes live as the drawing and the device properties change) above the table, the two tabs BOM 物料清单 (BOM) and 端子表 (Terminal Table), and 完成 (Done) at the bottom right to close it.
Counting rules
- One row = one device tag. All device records in the project that share a tag are merged into a single row:
the coil of
KM1plus its three contact groups still count as 1 device — provided they have been linked to the existing device. - Quantity is simply the number of device records under that tag. If two different components are both labelled
KM1(not linked, so the tag is duplicated), the quantity shows 2 and Electrical Rules Check reports “设备代号「KM1」重复出现 2 次” (device tag “KM1” appears 2 times). - Name / Model / Rating / Material Code / Notes come from the first non-empty value in the group, so for identical parts it is enough to fill them in once.
- Components with an empty tag are collected in the 未命名设备 (Unnamed Device) row. To have each of them listed separately, give them a tag.
- Rows are sorted by tag in “natural” order (
KM2beforeKM10), and the 序号 (No.) column is renumbered after sorting.
The table and the filters
The columns are, in order: 序号 (No.), 设备代号 (Device tag), 名称 (Name), 型号 (Model), 规格 (Rating), 数量 (Qty), 物料编码 (Material code), 备注 (Notes) and 操作 (Actions).
| Control | Licence | What it does |
|---|---|---|
| 仅主回路 (Main circuit only) | Pro | Keeps only the devices whose linked symbols have a power-input or power-output pin. |
| 排除指示灯 (Exclude indicator lamps) | Pro | Filters out devices whose symbol number is HL or whose name contains “指示灯” (indicator lamp). |
| 排除端子 (Exclude terminals) | Pro | Filters out symbols of the terminal category (handy when a large terminal strip makes the BOM very long). |
| The 隐藏 (Hide) button at the end of a row, hover tip “从 BOM 中隐藏该设备” (hide this device from the BOM) | Free | Drops the device from the count; the drawing itself is not affected. |
| 恢复隐藏项 (N) (Restore hidden items (N)) | Pro | Lists the hidden devices and puts them back one by one. |
| 添加手工项 (Add manual item) | Pro | Adds material that is not on the drawing (duct, terminal partitions, labels, consumables). |
| 导出 CSV (Export CSV) | Free | Exports the current filter result as a comma-separated file (opens directly in Excel). |
| 导出 Excel (Export Excel) | Pro | Exports a .xlsx. |
The free version shows the basic table and 导出 CSV (Export CSV) only; the filter area states 完整 BOM、筛选与 Excel 为 Pro 功能 (the full BOM, filters and Excel are Pro features). The footer reads 共 N 项,合计数量 X (N entries in total, total quantity X), and appends 已隐藏 N 台设备 (N devices hidden) when something is hidden. When the table is empty it shows 暂无统计项 (nothing to count yet) and the hint “放置带设备代号的符号,设备会自动进入 BOM;也可手工补充物料。” (Place symbols that carry a device tag and they enter the BOM automatically; you can also add material manually.)
Manual items
The 添加 BOM 手工项 (Add BOM manual item) / 编辑 BOM 手工项
(Edit BOM manual item) panel is filled field by field; the placeholders are, in order,
如 KA1, 如 中间继电器, 如 MY2N-J, 如 DC24V and 如 01020304, plus a quantity and a
note. Manual items are listed after the automatically counted ones, always have a quantity of at least 1, and their row offers
编辑手工项 (Edit manual item) and 删除手工项 (Delete manual item).
Because manual items do not come from the drawing they do not disappear when you delete a component — you have to maintain
them yourself.
Tip
The report is a live view, not a version. The table is recalculated immediately after you change the drawing or the device properties, but the app never stores a report snapshot: there is no version comparison and no record of “who changed what”. When you deliver, export a CSV/XLSX archive; the default file name starts with the project name (which is fixed as 未命名项目 (Untitled Project), but you can type a proper drawing number in the save panel).
Practical advice
- Run Electrical Rules Check first and clear the duplicated tags, then judge whether the BOM quantities make sense.
- Fill model and rating on the first component of that type; the other scattered instances inherit them automatically, because same tag means same device.
- For estimating, narrow the scope with 仅主回路 (Main circuit only) or 排除端子 (Exclude terminals); for the purchasing list, clear the filters again and export everything.