Sheet Setup
These settings belong to a single sheet page, so re-check them after switching pages. When no object on the canvas is selected, the right-hand inspector shows that page's 图纸设置 (Sheet Settings).
Sheet size
The 图幅 (Sheet Size) drop-down lists name and millimetre size together, in the form “A4 297×210”. The built-in presets are:
| Size | Width × Height (mm) | Size | Width × Height (mm) |
|---|---|---|---|
| A0 | 1189 × 841 | B0 | 1414 × 1000 |
| A1 | 841 × 594 | B1 | 1000 × 707 |
| A2 | 594 × 420 | B2 | 707 × 500 |
| A3 | 420 × 297 | B3 | 500 × 353 |
| A4 | 297 × 210 | B4 | 353 × 250 |
| New sheet pages default to A4 | B5 | 250 × 176 | |
Choosing 自定义… (Custom…) reveals 宽 (Width) and 高 (Height) millimetre fields. Sizes in any direction are clamped to 50–3000 mm; out-of-range values snap to the boundary. There is no landscape/portrait switch button — to get a landscape sheet, swap the width and height values by hand.
Tip
Changing the sheet size does not reflow the drawing. When you go from A3 to A4, components, wires, and text all stay at their original millimetre coordinates, and content near the right and bottom edges is cut off by the paper. Decide the sheet size before you draw; if you really must shrink the sheet, use 排列 ▸ 对齐 (Arrange ▸ Align) and grouped moves to bring the objects back inside the paper.
Title block
Along the bottom of every sheet runs a 30 mm tall title block split into two cells: the left cell holds the 图纸名称 (Drawing Name), and the right cell always renders as “图号 图号 v版本 设计 当前页/总页数” (_DrawingNo number vversion designer current page/total pages_). The four editable fields are:
| Field | Appears in | Notes |
|---|---|---|
| Drawing Name | Title block left cell | The title of this drawing, unrelated to the page name in the sidebar (the page name cannot be changed today — see Documents and Sheets). |
| 图号 (Drawing Number) | Title block right cell | The drawing identifier; it also becomes the page identifier in cross-reference labels. |
| 版本 (Version) | Title block right cell | A v prefix is added automatically when rendering, so enter only a number such as 1 or 2.0 here. |
| 设计 (Designer) | Title block right cell | Name of the designer / responsible engineer. |
The trailing page number, e.g. 3/12, is maintained automatically in page order by the program: adding
or deleting sheet pages recomputes the current-page/total-pages values for every page, and there is no manual entry
field. The data model also keeps “日期” (Date) and “审核” (Checked By) fields, but the interface has no edit boxes for
them and they are not drawn on the sheet.
Grid and snapping
| Control | Range | Default |
|---|---|---|
| 显示网格 (Show Grid) | Switch (also toggled from View ▸ 显示网格, ⌥⌘G, and the canvas right-click menu) | On |
| 吸附到网格 (Snap to Grid) | Switch (View ▸ 吸附到网格, ⇧⌘G) | On |
| 网格间距 (Grid Spacing) | Slider 2–20 mm, step 1 | 5 mm |
Snapping applies to placing components, dragging objects, wire drawing endpoints, dragging wire control points, and Align to Grid. With snapping off you can still align objects to exact coordinates by hand, but the X/Y fields in the inspector are always entered directly in millimetres and are unaffected by snapping.
Below 35% zoom the grid lines stop being drawn for a cleaner view; this is purely a display behavior — snapping still works at the configured spacing.
Rulers and zones
View ▸ 显示标尺 (Show Rulers, ⌥⌘R) is an app-level preference (on by default, shared by all windows). Ruler units are millimetres, and the tick interval is chosen automatically from 10/20/50/100/200/500/1000/2000 mm according to the current zoom.
The paper keeps a 10 mm inner margin, and outside the frame each 50 mm forms one zone: letters A, B, C… horizontally (wrapping around after 26 columns), numbers 1, 2, 3… vertically counted down from the top of the paper. Zone numbers cannot be renamed or turned off. The “分区” (zone) in cross-references, the zone column of the Terminal Schedule, and the “分区 B3” (Zone B3) shown in interruption point prompts all come from this cell of the object.
This-page statistics
The bottom of Sheet Settings shows the current page's 元件数 (Components), 导线数 (Wires), 文本注释 (Text Annotations), 电位网络 (Potential Networks), and 设备总数 (Total Devices). The first three count only the current page; Potential Networks and Total Devices count the whole project, because nets merge across pages through paired interrupts and device records are shared project-wide, so those last two figures do not change when you switch sheets.