FAQ and Known Limitations

Organised by symptom: every entry gives the cause and a workable response. If a feature is not described anywhere in this manual, you can be almost certain it does not exist yet.

Canvas and editing

I cannot click an object, and it will not drag
Check the layers first: a layer that is 隐藏 (hidden) or 锁定 (locked) takes its objects out of picking. Then make sure you are not stuck on another tool — while drawing wires, clicking a component does not select it; switch back to 选择 (Select) and click again. At a very small zoom the handles overlap, so press ⌘0 to fit the window first.
I drag one component and other components move with it
They are still in the selection (marquee and add-to-selection both accumulate). Click empty canvas or press Esc to clear the selection, and only the one object you point at will move.
After aligning, the components are off the grid
The shift produced by edge alignment is not necessarily a whole number of grid pitches — that is inherent. Run 排列 ▸ 对齐 ▸ 对齐到网格 (Arrange ▸ Align ▸ Align to Grid) to snap them back.
I want to nudge by 1 mm, or copy and paste to another sheet
Nudging: with the canvas focused, the arrow keys step by one grid pitch (5 mm by default); turn 吸附到网格 (Snap to Grid) off and each press moves 1 mm, with ⇧ for 10×. The clipboard is still unsupported: moving content across pages means redrawing it, or using an imported underlay as a reference; within one page you can use 创建副本 (Duplicate, ⌘D).
I moved a text annotation and Undo does nothing
Known limitation: moving a text annotation is not registered for undo, while adding, deleting, changing the content, changing the font size and dragging a label all are. Drag the text back into place by hand.
After switching sheets the properties panel says “对象已被删除”
(The object has been deleted.) Changing pages does not clear the selection, so the panel still refers to an object id from the previous sheet. Click once on an empty part of the canvas and it recovers.

Wires and electrical behaviour

Two wires cross, but they are not connected — why?
A plain crossing never creates a connection. Use the 接点 (Junction) tool and click on the crossing; a connection is made automatically only when an endpoint lands on another wire, which is also split there. See Drawing Wires.
I dragged a wire and the whole group of wire numbers changed
Wires merged through junctions belong to one network, and the numbers are recalculated after the connection changes. This is by design: numbers follow the electrical relationships.
After renumbering, one wire kept its old number
Three possibilities: the wire has 锁定线号(重编号时跳过) (Lock wire number — skip when renumbering) ticked; it sits on a network with a fixed potential group (N, L1, DC24V, PE and similar use the name directly); or it belongs to a group whose numbers are locked and it inherits that number.
按分区 (By zone) and 按图纸顺序 (By sheet order) give the same result
Both currently run the same algorithm: 按分区 does not yet group by zone number. If you want the same number across pages, use 按电位网络 (By potential network) together with identically named off-page connectors.
A red ! appeared on a component after I deleted a wire
That is Electrical Rules Check marking a dangling pin (Pro). Draw the wire back, or run a check to see which side it is on.

Documents, sheets and layers

I cannot add a third page
The free version is capped at 2 sheet pages and pops up “图纸页数上限是 Pro 功能” (the sheet-page limit is a Pro feature). After buying Pro you can add pages without limit.
Sheet pages cannot be renamed, reordered or copied
Known limitation: page names are fixed as 图纸 1, 图纸 2… (Sheet 1, Sheet 2…) and are maintained by page order; only the 图纸名称 (sheet name) shown in the title block is editable (see Sheet Size, Title Block and Grid). To “copy a page”, the only way is to add an empty page and redraw.
Every exported file of a new project is called “未命名项目…”
The project name is fixed as 未命名项目 (Untitled Project) with no place to rename it, so default export names start with it. Type the real drawing number in the save panel instead.
I changed the layer order but the over/under layout did not change
Layers are not a drawing hierarchy: the canvas uses a fixed order (underlays at the bottom, then wires, components, labels, handles on top). See Layers.
A newly drawn wire ended up on a layer I did not expect
New objects land on the first visible and unlocked layer — unrelated to the order of the layer list or to what you edited last. Hide or lock the other layers first, or select afterwards and use 分配到图层… (Assign to Layer…) to move them in bulk.
Pressing Space in Finder shows no preview
Version 1.0 has no QuickLook plug-in, so .eledraw files are just an icon in Finder. Export a PDF or PNG if you want a preview.
Components are missing in an old file, or the check report does not match the drawing
Symbol ids were generated at random in early versions, so references inside older files may no longer resolve. The current version repairs such references when the file opens, in the order “代号首字母 → 设备名称 → 引脚特征” (tag initial → device name → pin characteristics), and the repair itself does not mark the document as changed. If something is still missing, keep the original file and report it instead of overwriting it on save.

Reports and export

No cross-references were generated
Two conditions must hold at once: the coil and its contacts are 关联到同一设备 (linked to the same device — one tag), and you are running Pro. In the free version that spot shows 交叉引用(Pro) (Cross-reference (Pro)).
The same part appears on two BOM rows / the quantity is wrong
Two different device records with the same tag are counted as two rows (the check reports “设备代号重复” (duplicate device tag)). Conversely, several unlinked instances of one device are counted as several devices. The quantity column counts device records — see Bill of Materials.
The terminal table is empty
Only symbols of the 端子 (Terminal) category enter the table, and they have to be placed and connected to wires. Empty wire-number columns mean those wires are not numbered yet: run 图纸 ▸ 线号 ▸ 全部重新编号 (Drawing ▸ Wire Numbers ▸ Renumber All).
The exported DXF lets me “select no logic” in CAD
DXF and VSDX are flattened geometry: no blocks, no attributes, no electrical connectivity. That is the scope of the format, not an import error. Use PDF for structured delivery and the CSV/XLSX reports for electrical information.
The exported PDF differs from the screen
Check two things: hidden layers are not exported (expected behaviour), and the free version omits cross-references and adds a watermark. In Pro both match the screen.

Other

Can I print? Can it auto-save to the cloud?
Yes — File ▸ 打印… (Print…), ⌘P, prints all sheets; pick a page range in the print panel. There is no iCloud or automatic upload, a document is a single local .eledraw JSON file, so copying it is your backup.
Can I draw my own symbol?
No, version 1.0 has no symbol editor; 自定义符号 (Custom symbols) is only a reserved entry in the Pro list. If you need an extra GB-standard symbol, please send a request.
Can the interface be switched to English?
No, the 1.0 interface is Chinese-only. This manual is also available in English, and the bold Chinese words in it are exactly what you see on screen.

← Back to the website