Imported CAD Underlays

Underlays are for "tracing over": lay an existing CAD or Visio drawing under your sheet as a gray reference and redraw the electrical symbols and wires on top. DXF import is free; VSDX import is a Pro feature.

Import Commands

The entry point is File ▸ 导入导出 (Import/Export):

Menu ItemLicensingWhat Is Read
导入 DXF(作为底图)… (Import DXF as Underlay…)Free LINE, POLYLINE, LWPOLYLINE, CIRCLE, ARC, TEXT, MTEXT from the ENTITIES section. Blocks (BLOCKS), dimensions, hatches, and external references are ignored entirely. Encodings are tried in order: UTF-8, GB18030, CP1252, Latin-1.
导入 VSDX(作为底图)… (Import VSDX as Underlay…)Pro Flattened geometry outlines and text; only one page is imported. Visio's home page, connections, and shape data are not carried over.
清除导入底图 (Clear Imported Underlays)Free Removes all imported primitives on the current page; unavailable when the current page has no underlay.

Both formats have a 20000-primitive limit; beyond it the import is refused with "DXF 图元过多(超过 20000 个),请先在 CAD 中精简后再导入。" (Too many DXF primitives (over 20000); simplify the drawing in CAD first, then import.) or "VSDX 图形数量超过 20000 个,请先在 Visio 中拆分或简化图纸。" (The VSDX has more than 20000 shapes; split or simplify the drawing in Visio first.). When a DXF contains no supported primitives the message is "DXF 中没有找到可导入的图形(支持 LINE、POLYLINE、LWPOLYLINE、CIRCLE、ARC、TEXT、MTEXT)。" (No importable graphics found in the DXF (supported: LINE, POLYLINE, LWPOLYLINE, CIRCLE, ARC, TEXT, MTEXT).)

Where the Import Lands

What Underlays Can and Cannot Do

CanCannot
Serve as tracing reference; wires and components draw normally on top Select, move, scale, or rotate an individual underlay primitive
Come along in PDF/PNG/SVG/DXF/VSDX exports Be treated as electrical connections — underlay lines are not wires and take no part in networks or checks
Be cleared for the whole page in one action Be shown/hidden per layer (underlays belong to no layer); nor can they be partially deleted

Underlays render uniformly in light gray (about 55% gray, 80% opacity, 0.6 pt thin lines), so they never blend with black drawing lines and never obscure annotations.

Tip

Clicking Clear Imported Underlays first asks "清除导入底图?——将移除当前图纸的 N 个导入图元,可使用撤销恢复。" (Clear imported underlays? — This removes the N imported primitives on the current sheet; undo can bring them back.), with the buttons 清除 (Clear) and 取消 (Cancel). Undo recovers them just as well.

Suggested Workflow

  1. In CAD, delete everything irrelevant to the electrics (frames, notes, hatches), keep only the routing, and confirm the units are millimeters.
  2. Switch to the target sheet, set the sheet size, then run Import DXF as Underlay….
  3. While tracing, view the underlay page and the electrical content side by side; when done, cross-check the page against the underlay, and in the deliverable either clear the underlay or keep it for internal review.

← Back to the website